Arctic P8 PWM Value Pack 5 ventiladores

During the development of the new P8 PWM, particular emphasis was placed on a focused air stream and therefore high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM is particularly suitable for use in heatsinks and radiators.

Even at low speeds, the running sound of the new ARCTIC motor is hardly noticeable. Due to sinus magnetization, the new motor only creates about 5% of the commutation vibration of a normal unfiltered DC motor. Consequently, there is no need for rubber spacers due to the constant and smooth torque of the new motor.

The new Arctic engine has a service life four times longer, thanks to its low coil temperature. A 10 ° C lower motor temperature roughly doubles the life of the fan.

Thanks to the 4-Pin connector, the fan rotation speed can be regulated in a wide spectrum via PWM. In this way noise is kept to a minimum, while maximum cooling performance is guaranteed when needed.

Thanks to an alloy / lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development and less noise from the bearings, which means you can enjoy a longer life from your fan.

Highlights....

* 80x80x25mm fan.
* Speed: 200 ~ 3000 RPM.
* Low sound level: 0.3 sone.
* High airflow: 23.4 CFM.
* 4-Pin connection.