Español UReach Duplicadora 1:15 USB 3.1
UReach Duplicadora 1:15 USB 3.1
- Speed transfers of up to 16GB/min. (260MB/sec.)
- Supports the most current Flash drive capacities on the market (Over 18TB+).
- Copy Modes: 1. Quick Copy 2. Whole Media Copy.
- Data Wiping Modes: Quick Erase, Full Erase and DoD Erase.
- Standalone device, no PC required for operation.
- Extensive Flash-Media testing & diagnostic tools.
of guarantee
shipping
Secure pay
U-Reach Super U3 series USB 3.1 duplicator contains groundbreaking technology in the transfer speed. It supports duplication from 7 and up to 47 pcs, and the transfer speed is up to 16 GB/min. Its effortless use means a PC or other software are not required; and no risk of virus infection.
As the copy is done with bit-by-bit copy mode the result will satisfy the user at any time. With the copy & compare function, you can even be 100% sure your new targets are exactly the same as your master.
If you are looking for duplicators with faster copy speeds or higher target numbers, please let us know or check out our other product lines. We'll be happy to point you to a solution that matches your duplication needs.
Our dupliacators are standalone devices. Just plug in the power cord of the system, turn on the unit and start the production.
The unit is operated with the internal Controller with 4 buttons and an LCD display which is very easy to operate.
For all our units U-Reach offers free firmware updates so we make sure there is a high compatibility to new chips and controllers in the market.
Highlights...
* Impeccable Efficiency.
* 3 Sanitization Modes.
* Speed transfers of up to 16GB/min. (260MB/sec.)
* Supports the most current Flash drive capacities on the market (Over 18TB+).
* Copy Modes: 1. Quick Copy 2. Whole Media Copy.
* Data Wiping Modes: Quick Erase, Full Erase and DoD Erase.
* Standalone device, no PC required for operation.
* Extensive Flash-Media testing & diagnostic tools.
| Specifications | |
| Max. Transfer Speed | 16GB/min. (260MB/sec.) *Actual performance is dependent on USB transfer speeds* |
| Capacity | Supports the latest market available capacity Designed support capability over 18TB+ |
| Operating Type | Stand-alone, FPGA-based operation (Non PC-based) |
| Supported Languages | English or Japanese |
| LCD Display | Backlit Monochrome LCD Display |
| LEDs | 2 LED (Red/Green) Indicators per port |
| Control Panel | 4 Push Buttons(▲, ▼, OK, ESC) |
| Features | |
| Copy modes | Quick Copy (Systems & Files Copy) |
| Compare Functions | Bit-by-bit data comparison |
| Diagnostic Modes | H2 Test: Overwrites and Reads (by H2 files) H5 Test: Overwrites and Reads (by default files of the system) |
| Sanitization Modes | Quick Erase, Full Erase, and DoD Erase |
| Compatibilities | |
| Compatible Devices | USB-HDD / USB 3.1 / USB 2.0 / USB 1.1 USB Sticks. |
| Compatible Devicces (with required adapteer) | SD/MicroSD/CF |
| Supporteed Formats | Quick Copy: FAT16/32/64, Windows (NTFS), and Linux (Ext2/Ext3/Ext4) Whole Media Copy: All Formats, including proprietary formats |
| Supported OS | All (Windows, Mac, Linux, and other stand-alone systems) |
| Hardware specification | |
| Power Supply | 80W~or up (depends on different type of system requirement) |
| Working Temperature | 5°C ~ 45°C (41°F ~ 113°F) |
| Storage Temperature | -20°C ~85°C (-4°F ~ 185°F) |
| Working Humidity | 20% ~ 80% |
| Storage Humidiy | 5% ~ 95% |
| Certifications | FCC, CE, RoHS |
U-Reach Super U3 series USB 3.1 duplicator contains groundbreaking technology in the transfer speed. It supports duplication from 7 and up to 47 pcs, and the transfer speed is up to 16 GB/min. Its effortless use means a PC or other software are not required; and no risk of virus infection.
As the copy is done with bit-by-bit copy mode the result will satisfy the user at any time. With the copy & compare function, you can even be 100% sure your new targets are exactly the same as your master.
If you are looking for duplicators with faster copy speeds or higher target numbers, please let us know or check out our other product lines. We'll be happy to point you to a solution that matches your duplication needs.
Our dupliacators are standalone devices. Just plug in the power cord of the system, turn on the unit and start the production.
The unit is operated with the internal Controller with 4 buttons and an LCD display which is very easy to operate.
For all our units U-Reach offers free firmware updates so we make sure there is a high compatibility to new chips and controllers in the market.
Highlights...
* Impeccable Efficiency.
* 3 Sanitization Modes.
* Speed transfers of up to 16GB/min. (260MB/sec.)
* Supports the most current Flash drive capacities on the market (Over 18TB+).
* Copy Modes: 1. Quick Copy 2. Whole Media Copy.
* Data Wiping Modes: Quick Erase, Full Erase and DoD Erase.
* Standalone device, no PC required for operation.
* Extensive Flash-Media testing & diagnostic tools.
| Specifications | |
| Max. Transfer Speed | 16GB/min. (260MB/sec.) *Actual performance is dependent on USB transfer speeds* |
| Capacity | Supports the latest market available capacity Designed support capability over 18TB+ |
| Operating Type | Stand-alone, FPGA-based operation (Non PC-based) |
| Supported Languages | English or Japanese |
| LCD Display | Backlit Monochrome LCD Display |
| LEDs | 2 LED (Red/Green) Indicators per port |
| Control Panel | 4 Push Buttons(▲, ▼, OK, ESC) |
| Features | |
| Copy modes | Quick Copy (Systems & Files Copy) |
| Compare Functions | Bit-by-bit data comparison |
| Diagnostic Modes | H2 Test: Overwrites and Reads (by H2 files) H5 Test: Overwrites and Reads (by default files of the system) |
| Sanitization Modes | Quick Erase, Full Erase, and DoD Erase |
| Compatibilities | |
| Compatible Devices | USB-HDD / USB 3.1 / USB 2.0 / USB 1.1 USB Sticks. |
| Compatible Devicces (with required adapteer) | SD/MicroSD/CF |
| Supporteed Formats | Quick Copy: FAT16/32/64, Windows (NTFS), and Linux (Ext2/Ext3/Ext4) Whole Media Copy: All Formats, including proprietary formats |
| Supported OS | All (Windows, Mac, Linux, and other stand-alone systems) |
| Hardware specification | |
| Power Supply | 80W~or up (depends on different type of system requirement) |
| Working Temperature | 5°C ~ 45°C (41°F ~ 113°F) |
| Storage Temperature | -20°C ~85°C (-4°F ~ 185°F) |
| Working Humidity | 20% ~ 80% |
| Storage Humidiy | 5% ~ 95% |
| Certifications | FCC, CE, RoHS |
