Supermicro H11SSW-NT. 1x Socket SP3. Formato propietario.
Supermicro H11SSW-NT. 1x Socket SP3. Formato propietario.
- It supports an AMD EPYC series processor.
- Up to 2Tb of DDR4 ECC memory registered in 16 modules.
- Expansion slots: 1x PCI-E 3.0 x32, 1x PCI-E 3.0 x16.
- M.2: 2 PCI-E 3.0 x2 interface.
- 4 NVMe or 16 SATA3 through SlimSAS.
- 2x 10GBase-T LAN ports ..
- Up to 7 USB 3.0 ports.
P/N: MBD-H11SSW-NT
812,95 € Without VAT
983,67 € With VAT
Approximate delivery between 26 mayo and 27 mayo
3 years
of guarantee
of guarantee
Shipment
Insured
Insured
100%
Secure pay
Secure pay
Otros clientes que vieron este producto también se interesaron en
At this time, we do not have in our catalog any product with characteristics identical to: Supermicro MBD-H11SSW-NT. However, we can show you very similar products, if you tell us what you are looking for:
Formate | |
Chipset | |
Socket | |
kind of product | |
No. of sockets |
Physical Stats | Expansion Slots | |||
Form Factor | Propietario | PCI-E | 1 PCI-E 3.0 x32 1 PCI-E 3.0 x16 |
|
Dimensions | 34 x 31.2 cm | System BIOS | ||
Processor/Cache | Bios Type | AMI 128Mb SPI Flash EEPROM | ||
CPU | Single AMD EPYC 7001/7002* series Processors (*Board revision 2.x required) Socket SP3 |
Bios Features | Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 5.1, USB Keyboard Support, SMBIOS 3.1.1 | |
Cores / Cache | Up to 32 Cores Up to 64 Cores (Board revision 2.x required) |
Management | ||
System Memory | Software | Super Doctor 5, Watch Dog, NMI, SUM, IPMI 2.0, KVM with dedicated LAN | ||
Memory capacity | 16 DIMM sockets Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required) 8-channel memory bus |
Power Configurations | ACPI Power Management Power-on mode for AC power recovery |
|
Memory Type | DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required) |
PC Health Monitoring | ||
DIMM Size | 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required) | Voltage | +1.5V, +1.8V, +12V +5V, +5V standby | |
Memory voltage | 1.2 V | LED | CPU / System Overheat LED | |
On-Board Devides | Temperature | Monitoring for CPU and chassis environment, CPU Thermal Trip Support, Thermal control for 8x Fan connectors, I2C Temperature Sensing Logic | ||
Chipset | FAN | |||
SATA | SATA3 (6 Gbps) | Other features | Chassis Intrusion Detection Chassis Intrusion Header UID |
|
Network Controllers | 2 | Operating Environment | ||
Audio | Operating Temperature | 10°C to 35°C (50°F to 95°F) | ||
Graphics | Aspeed AST2500 BMC | Non-Operating Temperature | -40°C to 70°C (-40°F to 158°F) | |
Input / Output | Operating Relative Humidity | 8% - 90% (non-condensing) | ||
SATA | 2 SATA3 (6 Gbps) ports 16 SATA3 / 4 NVMe |
Non-Operating Relative Humidity | 5% - 95% (non-condensing) | |
LAN | 2 RJ45 10GBase-T Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
|||
USB | 7 USB 3.0 ports | |||
Video Output | 1 VGA port | |||
Serial Port | 2 COM port (rear) | |||
TPM | 1 TPM 2.0 header 1 TPM 1.2 header |
|||
M.2 | Interface: 2 PCI-E 3.0 x2 Form factor: 2280, 22110 Key: M-key |
Physical Stats | Expansion Slots | |||
Form Factor | Propietario | PCI-E | 1 PCI-E 3.0 x32 1 PCI-E 3.0 x16 |
|
Dimensions | 34 x 31.2 cm | System BIOS | ||
Processor/Cache | Bios Type | AMI 128Mb SPI Flash EEPROM | ||
CPU | Single AMD EPYC 7001/7002* series Processors (*Board revision 2.x required) Socket SP3 |
Bios Features | Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 5.1, USB Keyboard Support, SMBIOS 3.1.1 | |
Cores / Cache | Up to 32 Cores Up to 64 Cores (Board revision 2.x required) |
Management | ||
System Memory | Software | Super Doctor 5, Watch Dog, NMI, SUM, IPMI 2.0, KVM with dedicated LAN | ||
Memory capacity | 16 DIMM sockets Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required) 8-channel memory bus |
Power Configurations | ACPI Power Management Power-on mode for AC power recovery |
|
Memory Type | DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required) |
PC Health Monitoring | ||
DIMM Size | 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required) | Voltage | +1.5V, +1.8V, +12V +5V, +5V standby | |
Memory voltage | 1.2 V | LED | CPU / System Overheat LED | |
On-Board Devides | Temperature | Monitoring for CPU and chassis environment, CPU Thermal Trip Support, Thermal control for 8x Fan connectors, I2C Temperature Sensing Logic | ||
Chipset | FAN | |||
SATA | SATA3 (6 Gbps) | Other features | Chassis Intrusion Detection Chassis Intrusion Header UID |
|
Network Controllers | 2 | Operating Environment | ||
Audio | Operating Temperature | 10°C to 35°C (50°F to 95°F) | ||
Graphics | Aspeed AST2500 BMC | Non-Operating Temperature | -40°C to 70°C (-40°F to 158°F) | |
Input / Output | Operating Relative Humidity | 8% - 90% (non-condensing) | ||
SATA | 2 SATA3 (6 Gbps) ports 16 SATA3 / 4 NVMe |
Non-Operating Relative Humidity | 5% - 95% (non-condensing) | |
LAN | 2 RJ45 10GBase-T Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
|||
USB | 7 USB 3.0 ports | |||
Video Output | 1 VGA port | |||
Serial Port | 2 COM port (rear) | |||
TPM | 1 TPM 2.0 header 1 TPM 1.2 header |
|||
M.2 | Interface: 2 PCI-E 3.0 x2 Form factor: 2280, 22110 Key: M-key |
×