Mobotix MX2Wire+ Set. Convertidor de medios.

Mobotix MX2Wire+ Set. Convertidor de medios.

Mobotix
  • Easy connection of end devices for 10/100 Mbits Ethernet (e.g. IP camera, IP phone).
  • Power supply of Mx2wire + by PoE / PoE + or 48 - 57 V DC, 600 mA.
  • Power up to 13 watts of connected end devices (PoE class 3).
  • Transmission up to 500 m, data transmission speed of up to 50 Mbit / s depending on the distance.
  • It replaces the expensive and laborious laying of network cables.
  • Increased data security through efficient coding (128-bit AES).
  • Ambient temperature from -30 to 60 ° C.

P/N: MX-2WIREPLS-SET-PW - EAN/UPC: 4047438015356

320,80 € Without VAT
388,17 € With VAT
2 years
of guarantee
sending
shipping
100%
Secure pay

Mx2wire + converts the two-wire cables available in a PoE network quickly, easily and profitably. It will no longer be necessary to use Ethernet cables to connect IP cameras and other devices powered by PoE even if they are at a distance of up to 500 m. Each Mx2wire + kit contains two units.

There are many buildings with TV and telephone networks and other disused distribution networks. These can be immediately connected to the Mx2wire + as two-wire cables and become PoE network cables for data and voltage transmission. Thus, for example, you can replace an analog camera with a smart MOBOTIX camera without having to perform a new wiring.

A PoE device connected to the Mx2wire + system receives a power supply of up to 13 watts. This corresponds to the IEEE-802.3af standard. Mx2wire + requires power for its own consumption and for powering the PoE device through the PoE switch (class 0 or class 4, IEEE 802.3af / at) or the DC power supply (48-57 V, 600 mA).

With the appropriate two-wire cable, video data can be transmitted through Mx2wire + at a distance of up to 500 meters. Depending on the quality and length of the cable, the data transmission speed can be up to 45 Mbit / s. As at the same time it is a current conductor, the final device has a power of up to 12 W.

From the physical point of view, from a certain cable length only data can be transmitted, but not current. Thus, Mx2wire + significantly increases the range in installations without end devices powered by PoE (e.g. computers) compared to standard networks if reduced data rates are also sufficient for the application.

Highlights ...

* Easy connection of end devices for 10/100 Mbits Ethernet (eg, IP camera, IP phone).
* Power supply of Mx2wire + by PoE / PoE + or 48 - 57 V DC, 600 mA.
* Power up to 13 watts of connected end devices (PoE class 3).
* Transmission up to 500 m, data transmission speed of up to 50 Mbit / s depending on the distance.
* Replaces the expensive and laborious network cable routing.
* Increased data security through efficient coding (128-bit AES).
* Ambient temperature from -30 to 60 ° C.

Product Designation Mx2wire+ Set, Ethernet And PoE Via Two-Wire-Cable
Color Housing White
Certifications all PoE devices up to class 3, PoE IEEE 802.3af
Power Consumption 3 W
Power Supply PoE IEEE 802.3at
Interfaces
  • RJ45 (Ethernet 10/100 Mbit)
  • optional power supply 48–57 V DC (2 clamps)
  • two-wire connection (2 clamps)
RJ45 Connectors 2

Mx2wire + converts the two-wire cables available in a PoE network quickly, easily and profitably. It will no longer be necessary to use Ethernet cables to connect IP cameras and other devices powered by PoE even if they are at a distance of up to 500 m. Each Mx2wire + kit contains two units.

There are many buildings with TV and telephone networks and other disused distribution networks. These can be immediately connected to the Mx2wire + as two-wire cables and become PoE network cables for data and voltage transmission. Thus, for example, you can replace an analog camera with a smart MOBOTIX camera without having to perform a new wiring.

A PoE device connected to the Mx2wire + system receives a power supply of up to 13 watts. This corresponds to the IEEE-802.3af standard. Mx2wire + requires power for its own consumption and for powering the PoE device through the PoE switch (class 0 or class 4, IEEE 802.3af / at) or the DC power supply (48-57 V, 600 mA).

With the appropriate two-wire cable, video data can be transmitted through Mx2wire + at a distance of up to 500 meters. Depending on the quality and length of the cable, the data transmission speed can be up to 45 Mbit / s. As at the same time it is a current conductor, the final device has a power of up to 12 W.

From the physical point of view, from a certain cable length only data can be transmitted, but not current. Thus, Mx2wire + significantly increases the range in installations without end devices powered by PoE (e.g. computers) compared to standard networks if reduced data rates are also sufficient for the application.

Highlights ...

* Easy connection of end devices for 10/100 Mbits Ethernet (eg, IP camera, IP phone).
* Power supply of Mx2wire + by PoE / PoE + or 48 - 57 V DC, 600 mA.
* Power up to 13 watts of connected end devices (PoE class 3).
* Transmission up to 500 m, data transmission speed of up to 50 Mbit / s depending on the distance.
* Replaces the expensive and laborious network cable routing.
* Increased data security through efficient coding (128-bit AES).
* Ambient temperature from -30 to 60 ° C.

Product Designation Mx2wire+ Set, Ethernet And PoE Via Two-Wire-Cable
Color Housing White
Certifications all PoE devices up to class 3, PoE IEEE 802.3af
Power Consumption 3 W
Power Supply PoE IEEE 802.3at
Interfaces
  • RJ45 (Ethernet 10/100 Mbit)
  • optional power supply 48–57 V DC (2 clamps)
  • two-wire connection (2 clamps)
RJ45 Connectors 2