Icy Dock MB839SP-B para 1x 2.5" SATA SSD/HDD a PCIe 2.0

Icy Dock MB839SP-B para 1x 2.5" SATA SSD/HDD a PCIe 2.0

Icy Dock
  • Compatible with Mac Pro 2008-2012 models without the need for drivers
  • For 1x SATA or SSD hard drive from 7mm to 9.5mm high
  • It uses the PCIe 2.0 x1 interface, it also supports installation in PCIe 2.0 and PCIe 3.0 x1, x4, x8 and x16 slots.
  • Installs in single-width PCIe expansion slot
  • The PCIe interface provides power and data transfer that ultimately reduces cable clutter.
  • The narrow design allows for the installation of multiple bays side by side in a modular design.
  • Includes full-height PCIe faceplate to protect against dust build-up.
  • Strong hot-swap connector for a minimum of 10,000 insert / remove cycles.
  • The Eagle Hook Locking System keeps the unit secure in the box.
  • EMI Grounding and protecting hard drives from electrical damage
  • Anti-vibration technology (TAV) reduces noise and protects against environmental damage.
  • Active Power Technology (TPA) saves power by shutting down the device when no drive is installed.

P/N: MB839SP-B - EAN/UPC: 4713227445214

85,90 € Without VAT
103,94 € With VAT
Only 1 unit left in secondary storage
Approximate delivery between 26 mayo and 27 mayo
3 years
of guarantee
Shipment
Insured
100%
Secure pay

Otros clientes que vieron este producto también se interesaron en

Introducing the rugged ToughArmor MB839SP-B removable drive bay for 2.5 ”SATA and SSD hard drives (9.5mm high). Using the standard PCIe 2.0 interface and taking only one PCIe expansion slot, the MB839SP-B offers you an additional hot-swap drive bay for hard disk drives (HDD) and solid state drives (SSD), even when the computer it does not have an open SATA port or an empty drive bay. Because the single PCIe port handles both power and data, there is no additional clutter of SATA data and power cables. It fully supports hot swap drives with its removable drive tray.

MB839SP-B adds full hot-swap support via the PCIe 2.0 / 3.0 interface, allowing you to add or remove drives in seconds without having to shut down the computer or open the case. Hot-swap media avoid downtime when upgrading storage or replacing a failed drive, and allow a technician to work more efficiently. The Hot-Swap-ready connector, capable of 10,000 insertion and removal cycles, enables drive installation, removal, and replacement without the need to shut down the system.

Add an additional hard drive or SSD to your desktop using the unused PCIe expansion slots. Using the PCIe interface allows you to overcome the typical limitations of your computer's disk drive by providing you with a removable, removable bay for SSD / HDD drives.

ToughArmor MB839SP-B is designed for single channel (x1) PCIe 2.0 and 3.0 interface and for maximum compatibility it also supports full length PCIe x4, x8 and x16 slots.

The robust, all-metal chassis, tray and mounting bracket help ensure long product life as well as increased heat dissipation. An anti-vibration mechanism built into the chassis reduces noise and protects against environmental damage.

Large vents on both sides of the case work with your system's cooling system to keep your drives cool under load. The width of a slot is narrow enough to allow cooling even when multiple bays are installed side by side.

MB839SP-B is equipped with a built-in tray LED that can display drive power / access LED light.

For easy drive health monitoring, connect your computer / server's drive access / power LED to the 2-pin hard drive status header (cable not included), to easily see when it is being used drive from the front of the computer.

Utilizing the PCIe 2.0 interface enables a huge speed improvement over older PCs and Mac Pro 2008-2012 models that only natively support SATA II speeds, allowing you to take advantage of huge improvements in speed of modern SSD drives.

Utilizing the PCIe 2.0 interface enables power and data transfer in the same location, ultimately reducing cable clutter in the PC case.

Highlights...

* For 1x SATA or SSD hard drive from 7mm to 9.5mm high.
* The PCIe interface provides power and data transfer that ultimately reduces cable clutter.
* Includes full-height PCIe faceplate to protect against dust build-up
* Eagle hook locking system keeps unit secure in box.
* Anti-vibration technology (TAV) reduces noise and protects against environmental damage. 
 

Color Negro
Tamaño de la unidad de soporte 1 x 2.5" SSD/HDD
Numero de accionamientos 1
Altura máxima del disco 9.5mm
Bahia de unidad 1x ranura de expansión PCIe 2.0
Interfaz de host PCIe 2.0 x1 o superior
Entrada de energia PCIe 2.0
Velocidad de transferencia Hasta 500 MB/ s 
Controlador IC ASMedia - ASM1061
Capacidad del disco duro Sin limitación
Refrigeración Dispersión de calor metálico con refrigeración pasiva
Estructura Metal con plastico ABS parcial
Soporte Hot Swap Si
Dimensiones 154 x 122 x 22 mm
Humedad 5%~65% HR
Temperatura de funcionamiento 0°C a 60°C (32°F a 140°F)
Temperatura de almacenamiento -35°C a 70°C (-31°F a 158°F)
Certificados CE, RoHS, REACH

Introducing the rugged ToughArmor MB839SP-B removable drive bay for 2.5 ”SATA and SSD hard drives (9.5mm high). Using the standard PCIe 2.0 interface and taking only one PCIe expansion slot, the MB839SP-B offers you an additional hot-swap drive bay for hard disk drives (HDD) and solid state drives (SSD), even when the computer it does not have an open SATA port or an empty drive bay. Because the single PCIe port handles both power and data, there is no additional clutter of SATA data and power cables. It fully supports hot swap drives with its removable drive tray.

MB839SP-B adds full hot-swap support via the PCIe 2.0 / 3.0 interface, allowing you to add or remove drives in seconds without having to shut down the computer or open the case. Hot-swap media avoid downtime when upgrading storage or replacing a failed drive, and allow a technician to work more efficiently. The Hot-Swap-ready connector, capable of 10,000 insertion and removal cycles, enables drive installation, removal, and replacement without the need to shut down the system.

Add an additional hard drive or SSD to your desktop using the unused PCIe expansion slots. Using the PCIe interface allows you to overcome the typical limitations of your computer's disk drive by providing you with a removable, removable bay for SSD / HDD drives.

ToughArmor MB839SP-B is designed for single channel (x1) PCIe 2.0 and 3.0 interface and for maximum compatibility it also supports full length PCIe x4, x8 and x16 slots.

The robust, all-metal chassis, tray and mounting bracket help ensure long product life as well as increased heat dissipation. An anti-vibration mechanism built into the chassis reduces noise and protects against environmental damage.

Large vents on both sides of the case work with your system's cooling system to keep your drives cool under load. The width of a slot is narrow enough to allow cooling even when multiple bays are installed side by side.

MB839SP-B is equipped with a built-in tray LED that can display drive power / access LED light.

For easy drive health monitoring, connect your computer / server's drive access / power LED to the 2-pin hard drive status header (cable not included), to easily see when it is being used drive from the front of the computer.

Utilizing the PCIe 2.0 interface enables a huge speed improvement over older PCs and Mac Pro 2008-2012 models that only natively support SATA II speeds, allowing you to take advantage of huge improvements in speed of modern SSD drives.

Utilizing the PCIe 2.0 interface enables power and data transfer in the same location, ultimately reducing cable clutter in the PC case.

Highlights...

* For 1x SATA or SSD hard drive from 7mm to 9.5mm high.
* The PCIe interface provides power and data transfer that ultimately reduces cable clutter.
* Includes full-height PCIe faceplate to protect against dust build-up
* Eagle hook locking system keeps unit secure in box.
* Anti-vibration technology (TAV) reduces noise and protects against environmental damage. 
 

Color Negro
Tamaño de la unidad de soporte 1 x 2.5" SSD/HDD
Numero de accionamientos 1
Altura máxima del disco 9.5mm
Bahia de unidad 1x ranura de expansión PCIe 2.0
Interfaz de host PCIe 2.0 x1 o superior
Entrada de energia PCIe 2.0
Velocidad de transferencia Hasta 500 MB/ s 
Controlador IC ASMedia - ASM1061
Capacidad del disco duro Sin limitación
Refrigeración Dispersión de calor metálico con refrigeración pasiva
Estructura Metal con plastico ABS parcial
Soporte Hot Swap Si
Dimensiones 154 x 122 x 22 mm
Humedad 5%~65% HR
Temperatura de funcionamiento 0°C a 60°C (32°F a 140°F)
Temperatura de almacenamiento -35°C a 70°C (-31°F a 158°F)
Certificados CE, RoHS, REACH