Gigabyte MZ01-CE1. Socket SP3.

Gigabyte MZ01-CE1. Socket SP3.

Gigabyte
  • AMD EPYC 7001 series processor family.
  • 8-Channel RDIMM/LRDIMM DDR4, 8 x DIMMs.
  • 2 x 1Gb/s LAN ports (Intel I210-AT).
  • 1 x dedicated management port.
  • 4 x SlimSAS (with 16 x SATA 6Gb/s) ports.
  • Ultra-Fast M.2 with PCIe Gen3 x4 interface.
  • Up to 5 x PCIe Gen3 expansion slots.
  • Aspeed AST2500 remote management controller.

P/N: MZ01-CE1 - EAN/UPC: 4719331804510

400,15 € Without VAT
484,18 € With VAT
2 years
of guarantee
sending
shipping
100%
Secure pay

AMD’s return to the CPU segment delivers a whole new value proposition to the x86 world. Built on GIGABYTE’s extensive design expertise across a range of chipset platforms, this AMD EPYC platform is already receiving acclaim for its high specification.

This platform is intended as an alternative for builders in the x86 space and packs a real punch in flexibility and expansion options.

Both single- and dual-socket CPUs come equipped with 128x PCIe lanes, providing extensive I/O options. This is a huge improvement in I/O vs. incumbent x86 offerings.

Increased I/O allows for flexibility in extending your storage, networking or compute to a level previously unattainable with standard server motherboards.

In addition, the integrated nature of the processor – designed as a system-on-chip (SoC) - means that there is no need for a separate PCH and less additional switches needed for expansion lanes.

GIGABYTE AMD EPYC platforms are designed to support on-board ‘M.2’ storage devices for time-sensitive operations and leaves room on the standard storage for compute tasks. Delivering up to 32 Gb/s data transfer speeds, M.2 offers users considerably faster storage performance than current mSATA devices.

GIGABYTE’s passive components are carefully selected to guarantee a stable operating environment and allow the processors and the memory to deliver their maximum performance. GIGABYTE’s server motherboards are built with long lasting components for a high degree of reliability and durability.

GIGABYTE’s AMD EPYC server systems and motherboards are fully compatible and qualified to use with NVIDIA’s Tesla V100 GPU, an advanced data center GPU built to accelerate AI, HPC, and graphics. Powered by NVIDIA’s Volta architecture and with 640 Tensor Cores, the Tesla V100 has broken the 100 teraflops (TFLOPS) barrier of deep learning performance — enabling data scientists, researchers, and engineers to tackle challenges that were once impossible.

Highlights...

* AMD EPYC 7001 series processor family.
* 8-Channel RDIMM/LRDIMM DDR4, 8 x DIMMs.
* 2 x 1Gb/s LAN ports (Intel I210-AT).
* 1 x dedicated management port.
* 4 x SlimSAS (with 16 x SATA 6Gb/s) ports.
* Ultra-Fast M.2 with PCIe Gen3 x4 interface.
* Up to 5 x PCIe Gen3 expansion slots.
* Aspeed AST2500 remote management controller.

Form Factor ATX (305W x 244D mm)
CPU AMD EPYC 7001 series processor family
Single processor, 14nm
Up to 32-core, 64 threads
TDP up to 200W
Socket SP3
Chipset System on Chip
Memory 8 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Memory speed: 2666/2400/2133 MHz
LAN 2 x 1Gb/s LAN ports (Intel I210-AT)
1 x 10/100/1000 management LAN
Audio -
SAS -
SATA 4 x SlimSAS for 16 x SATA III 6Gb/s ports
RAID -
Expansion Slots

Slot_7 (PCIe_7): 1 x PCIe x16 (Gen3 x16 bus)
Slot_5 (PCIe_5): 1 x PCIe x16 (Gen3 x16 bus)
Slot_4 (PCIe_4): 1 x PCIe x8 (Gen3 x8 bus)
Slot_3 (PCIe_3): 1 x PCIe x16 (Gen3 x16 bus)
Slot_1 (PCIe_1): 1 x PCIe x16 (Gen3 x16 bus)

1 x M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards

Internal I/O Ports 1x 24-pin ATX main power connector
2x 8-pin ATX 12V power connectors
4x SlimSAS connectors
1x M.2 slot
1x CPU fan headers
6x System fan headers
1x USB 3.0 header
2x COM headers
1x TPM header
1x Front panel header
1x HDD back plane board header
1x PMBus connector
1x IPMB connector
1x Clear CMOS jumper
1x BIOS recovery jumper
Rear I/O Ports 2x USB 3.0
1x VGA
2x RJ45
1x MLAN
1x ID switch with LED
1x Power switch with LED
TPM 1x TPM header with LPC interface
Optional TPM2.0 kit: CTM000
PSU Connectors 1x 24-pin ATX main power connector
2x 8-pin ATX 12V power connectors
Operating Properties Operating temperature: 10°C to 40°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

AMD’s return to the CPU segment delivers a whole new value proposition to the x86 world. Built on GIGABYTE’s extensive design expertise across a range of chipset platforms, this AMD EPYC platform is already receiving acclaim for its high specification.

This platform is intended as an alternative for builders in the x86 space and packs a real punch in flexibility and expansion options.

Both single- and dual-socket CPUs come equipped with 128x PCIe lanes, providing extensive I/O options. This is a huge improvement in I/O vs. incumbent x86 offerings.

Increased I/O allows for flexibility in extending your storage, networking or compute to a level previously unattainable with standard server motherboards.

In addition, the integrated nature of the processor – designed as a system-on-chip (SoC) - means that there is no need for a separate PCH and less additional switches needed for expansion lanes.

GIGABYTE AMD EPYC platforms are designed to support on-board ‘M.2’ storage devices for time-sensitive operations and leaves room on the standard storage for compute tasks. Delivering up to 32 Gb/s data transfer speeds, M.2 offers users considerably faster storage performance than current mSATA devices.

GIGABYTE’s passive components are carefully selected to guarantee a stable operating environment and allow the processors and the memory to deliver their maximum performance. GIGABYTE’s server motherboards are built with long lasting components for a high degree of reliability and durability.

GIGABYTE’s AMD EPYC server systems and motherboards are fully compatible and qualified to use with NVIDIA’s Tesla V100 GPU, an advanced data center GPU built to accelerate AI, HPC, and graphics. Powered by NVIDIA’s Volta architecture and with 640 Tensor Cores, the Tesla V100 has broken the 100 teraflops (TFLOPS) barrier of deep learning performance — enabling data scientists, researchers, and engineers to tackle challenges that were once impossible.

Highlights...

* AMD EPYC 7001 series processor family.
* 8-Channel RDIMM/LRDIMM DDR4, 8 x DIMMs.
* 2 x 1Gb/s LAN ports (Intel I210-AT).
* 1 x dedicated management port.
* 4 x SlimSAS (with 16 x SATA 6Gb/s) ports.
* Ultra-Fast M.2 with PCIe Gen3 x4 interface.
* Up to 5 x PCIe Gen3 expansion slots.
* Aspeed AST2500 remote management controller.

Form Factor ATX (305W x 244D mm)
CPU AMD EPYC 7001 series processor family
Single processor, 14nm
Up to 32-core, 64 threads
TDP up to 200W
Socket SP3
Chipset System on Chip
Memory 8 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Memory speed: 2666/2400/2133 MHz
LAN 2 x 1Gb/s LAN ports (Intel I210-AT)
1 x 10/100/1000 management LAN
Audio -
SAS -
SATA 4 x SlimSAS for 16 x SATA III 6Gb/s ports
RAID -
Expansion Slots

Slot_7 (PCIe_7): 1 x PCIe x16 (Gen3 x16 bus)
Slot_5 (PCIe_5): 1 x PCIe x16 (Gen3 x16 bus)
Slot_4 (PCIe_4): 1 x PCIe x8 (Gen3 x8 bus)
Slot_3 (PCIe_3): 1 x PCIe x16 (Gen3 x16 bus)
Slot_1 (PCIe_1): 1 x PCIe x16 (Gen3 x16 bus)

1 x M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards

Internal I/O Ports 1x 24-pin ATX main power connector
2x 8-pin ATX 12V power connectors
4x SlimSAS connectors
1x M.2 slot
1x CPU fan headers
6x System fan headers
1x USB 3.0 header
2x COM headers
1x TPM header
1x Front panel header
1x HDD back plane board header
1x PMBus connector
1x IPMB connector
1x Clear CMOS jumper
1x BIOS recovery jumper
Rear I/O Ports 2x USB 3.0
1x VGA
2x RJ45
1x MLAN
1x ID switch with LED
1x Power switch with LED
TPM 1x TPM header with LPC interface
Optional TPM2.0 kit: CTM000
PSU Connectors 1x 24-pin ATX main power connector
2x 8-pin ATX 12V power connectors
Operating Properties Operating temperature: 10°C to 40°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)