D-Link DGS-1210-10P. Switch Smart Managed. 10 Puertos.
D-Link DGS-1210-10P. Switch Smart Managed. 10 Puertos.
- Management Advanced Layer 2 and Layer 3 Static routing.
- Command line interface (CLI) interface and web GUI.
- Static Routing and MSTP.
- PoE, PoE + and Uplinks fiber optic options.
- Dual image and dual configuration files.
of guarantee
shipping
Secure pay
With more PoE capability, advanced Layer 2 management and Layer 3 functions such as Static Routing, the range of Smart + D ‑ Link DGS ‑ 1210 Switches provides the best cost / efficiency solution for deploying managed networks in any environment.
The DGS-1210 Smart + family is the only one in its segment with advanced management options, accessible through the Compact CLI interface or through Web-based UI to enable advanced network management functionalities; VLANs, multiple spanning tree protocol (MSTP), link aggregation (LACP), static routing, dual software images, and dual configuration files.
In addition, security features such as IGMP snooping, access control lists, port security and D-Link Safeguard Engine technology protect data integrity (even more mandatory after the GDPR goes into effect) against malicious attacks such as denial of service, broadcast, multicast and unicast flooding.
They ensure the performance and scalability necessary for any business environment, especially in long-distance deployments such as factories or university campuses. Fiber optic is more efficient, immune to interference and gives access to greater bandwidths to ensure network growth.
The DGS-1210 + series has several switches with PoE and PoE + ports to power the compatible devices via the LAN network cable: video surveillance cameras, IP phones, access points, etc., which increases the simplicity and flexibility of installation, at the same time it represents a significant saving in deployment and maintenance costs by avoiding the need to install additional electrical outlets.
Thanks to the support of the IEEE 302.3az Energy Efficient Ethernet standard and D-Link Green 3.0 technology. Highlights include high-efficiency automated functions such as dissipation with fans that automatically adjust to the temperature of the equipment in PoE models and without fan in the rest of the range, hibernation and intelligent disconnection of ports and LEDs, cable length detection and Time-based PoE.
Highlights...
* Supports Compact Command-Line Interface for advanced management.
* Route Layer 3 traffic between switches, even if they are segmented in VLAN.
* Increase connection distances with less interference and greater bandwidth through fiber optics.
* D-Link's exclusive Surveillance interface is easy to use and offers you more optimal management of IP cameras and network video recorders.
General |
|
Hardware versión | F1 |
Port Standards | IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper) IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE 802.3x Flow Control IEEE 802.3af/at compliance (for PoE ports) |
Number of Ports | 8 x 10/100/1000BASE-T PoE 2 x 100/1000 Mbps SFP |
Network Cables | UTP Cat. 5, Cat. 5e (100 m max.) |
Full/Half Duplex | Full/half-duplex for 10/100 Mbps and full-duplex for 1000 Mbps |
Media Interface Exchange | Auto MDI/MDIX adjustment for all twisted-pair ports |
Performance | |
Switching Capacity | 20Gbps |
Transmission Method | Store-and-forward |
MAC Address Table | 8K entries |
Static MAC Addresses | 256 entries |
Max. 64 bytes Packet Forwarding Rate | 14.88 Mpps |
Packet Buffer Memory | 4.1 Mbits |
CPU Memory | 128Mb DDR3 |
Flash Memory | 32Mb |
MTBF | 729,258 hours |
PoE | |
PoE Capable Ports | Ports 1 to 8 |
Power Budget | 65W |
Dimensiones y condiciones ambientales | |
Power Input | 54.0 V DC external power adapter |
Maximum Power Consumption | 80.6 W (PoE on) 7.5 W (PoE off) |
Standby Power Consumption | 2.5W |
Smart Fan Quantity | |
Acoustics | 0 dBA |
Heat Dissipation | 275.04 BTU/hr |
Operation Temperature | -5 to 50°C |
Storage Temperature | -20 to 70°C |
Operation Humidity | 0% to 95% relative humidity |
Storage Humidity | 0% to 95% relative humidity |
Dimensions | 280 x 126 x 44 mm |
Weight | • 0.95 kg |
Diagnostic LEDs | Power (per device), Link/Active/Speed (per port), PWR Max, Fan Error |
Certifications | CE Class A, VCCI Class A, FCC Class A, BSMI, CCC |
Safety | CB, UL, BSMI, CCC |
With more PoE capability, advanced Layer 2 management and Layer 3 functions such as Static Routing, the range of Smart + D ‑ Link DGS ‑ 1210 Switches provides the best cost / efficiency solution for deploying managed networks in any environment.
The DGS-1210 Smart + family is the only one in its segment with advanced management options, accessible through the Compact CLI interface or through Web-based UI to enable advanced network management functionalities; VLANs, multiple spanning tree protocol (MSTP), link aggregation (LACP), static routing, dual software images, and dual configuration files.
In addition, security features such as IGMP snooping, access control lists, port security and D-Link Safeguard Engine technology protect data integrity (even more mandatory after the GDPR goes into effect) against malicious attacks such as denial of service, broadcast, multicast and unicast flooding.
They ensure the performance and scalability necessary for any business environment, especially in long-distance deployments such as factories or university campuses. Fiber optic is more efficient, immune to interference and gives access to greater bandwidths to ensure network growth.
The DGS-1210 + series has several switches with PoE and PoE + ports to power the compatible devices via the LAN network cable: video surveillance cameras, IP phones, access points, etc., which increases the simplicity and flexibility of installation, at the same time it represents a significant saving in deployment and maintenance costs by avoiding the need to install additional electrical outlets.
Thanks to the support of the IEEE 302.3az Energy Efficient Ethernet standard and D-Link Green 3.0 technology. Highlights include high-efficiency automated functions such as dissipation with fans that automatically adjust to the temperature of the equipment in PoE models and without fan in the rest of the range, hibernation and intelligent disconnection of ports and LEDs, cable length detection and Time-based PoE.
Highlights...
* Supports Compact Command-Line Interface for advanced management.
* Route Layer 3 traffic between switches, even if they are segmented in VLAN.
* Increase connection distances with less interference and greater bandwidth through fiber optics.
* D-Link's exclusive Surveillance interface is easy to use and offers you more optimal management of IP cameras and network video recorders.
General |
|
Hardware versión | F1 |
Port Standards | IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper) IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE 802.3x Flow Control IEEE 802.3af/at compliance (for PoE ports) |
Number of Ports | 8 x 10/100/1000BASE-T PoE 2 x 100/1000 Mbps SFP |
Network Cables | UTP Cat. 5, Cat. 5e (100 m max.) |
Full/Half Duplex | Full/half-duplex for 10/100 Mbps and full-duplex for 1000 Mbps |
Media Interface Exchange | Auto MDI/MDIX adjustment for all twisted-pair ports |
Performance | |
Switching Capacity | 20Gbps |
Transmission Method | Store-and-forward |
MAC Address Table | 8K entries |
Static MAC Addresses | 256 entries |
Max. 64 bytes Packet Forwarding Rate | 14.88 Mpps |
Packet Buffer Memory | 4.1 Mbits |
CPU Memory | 128Mb DDR3 |
Flash Memory | 32Mb |
MTBF | 729,258 hours |
PoE | |
PoE Capable Ports | Ports 1 to 8 |
Power Budget | 65W |
Dimensiones y condiciones ambientales | |
Power Input | 54.0 V DC external power adapter |
Maximum Power Consumption | 80.6 W (PoE on) 7.5 W (PoE off) |
Standby Power Consumption | 2.5W |
Smart Fan Quantity | |
Acoustics | 0 dBA |
Heat Dissipation | 275.04 BTU/hr |
Operation Temperature | -5 to 50°C |
Storage Temperature | -20 to 70°C |
Operation Humidity | 0% to 95% relative humidity |
Storage Humidity | 0% to 95% relative humidity |
Dimensions | 280 x 126 x 44 mm |
Weight | • 0.95 kg |
Diagnostic LEDs | Power (per device), Link/Active/Speed (per port), PWR Max, Fan Error |
Certifications | CE Class A, VCCI Class A, FCC Class A, BSMI, CCC |
Safety | CB, UL, BSMI, CCC |