Español 
Chenbro RM21706-L Rack 2U con 6 bahías HD hot-swap. Extended-ATX
You need a special power supply.
Important expansion possibilities.
Complete cooling system.
Up to 6 hot-swappable hard drive bays. (Requires the use of backplane model 84H321710-046, not included).
of guarantee
Insured
Secure pay
| Power supply | |
| Height | |
| Fondo | |
| Supported board | |
| Supported board | |
| Front Hot-Swap | |
| Número de Slots | |
| Supported board |
Chenbro RM21706-L 2U rack with a simple design for easy assembly and maintenance.
Its black front, has 6 hard disk bays with hot-swap function for hot swapping. To them are added: one of 5.25 "and one of 3.5" external.
It has six low-profile expansion slots and is compatible with Extended-ATX (12 "x13"), CEB (12 "x10.5") and ATX boards.
As a cooling system, it uses four 80mm fans (included) located in the middle part of the case, to which two 40mm rear fans can be added.
It does not include a power supply, it uses special models.
Highlight ...
* Compatibility with standard ATX boards.
* Needs a special power supply.
* Important expansion possibilities.
* Complete cooling system.
* Up to 6 bays for hard disk with hot-swap system. (Requires the use of backplane model 84H321710-046, not included).
| Descripción | |
| Modelo | RM21706-L |
| Material | Acero SGCC 1.2 mm |
| Formato | 2U |
| Color Externo | Frontal -> Negro Estructura -> Gris |
| Color Interno | Interior y rejillas grises |
| Conexiones | 1x USB 2.0 |
| Incluye Fuente | No |
| Extras | - |
| Compatibilidad | |
| Formato Placa Madre | E-ATX / CEB / ATX |
| Formato F.A. | Formato 2U |
| Long. máxima F.A. | |
| Long. máxima VGA | |
| Alto máximo Cooler | |
| Expansión | |
| Slots | 6x Bajo perfil |
| Bahías Externas | 6x 3.5" Hot-Swap 1x 5.25" 1x Slim ODD |
| Bahías Internas | - |
| Ventilación | |
| Frontal | - |
| Trasero | 4x 40 mm (opcional) |
| Inertermedios | 4x 80 mm PWM |
| Dimensiones | |
| Ancho | 430 mm |
| Alto | 88 mm |
| Fondo | 660 mm |
| Peso | 10.1 Kg |
Acc. Cajas Rack
Storage Expansion Kits
Fuentes para Servidor
Chenbro RM21706-L 2U rack with a simple design for easy assembly and maintenance.
Its black front, has 6 hard disk bays with hot-swap function for hot swapping. To them are added: one of 5.25 "and one of 3.5" external.
It has six low-profile expansion slots and is compatible with Extended-ATX (12 "x13"), CEB (12 "x10.5") and ATX boards.
As a cooling system, it uses four 80mm fans (included) located in the middle part of the case, to which two 40mm rear fans can be added.
It does not include a power supply, it uses special models.
Highlight ...
* Compatibility with standard ATX boards.
* Needs a special power supply.
* Important expansion possibilities.
* Complete cooling system.
* Up to 6 bays for hard disk with hot-swap system. (Requires the use of backplane model 84H321710-046, not included).
| Descripción | |
| Modelo | RM21706-L |
| Material | Acero SGCC 1.2 mm |
| Formato | 2U |
| Color Externo | Frontal -> Negro Estructura -> Gris |
| Color Interno | Interior y rejillas grises |
| Conexiones | 1x USB 2.0 |
| Incluye Fuente | No |
| Extras | - |
| Compatibilidad | |
| Formato Placa Madre | E-ATX / CEB / ATX |
| Formato F.A. | Formato 2U |
| Long. máxima F.A. | |
| Long. máxima VGA | |
| Alto máximo Cooler | |
| Expansión | |
| Slots | 6x Bajo perfil |
| Bahías Externas | 6x 3.5" Hot-Swap 1x 5.25" 1x Slim ODD |
| Bahías Internas | - |
| Ventilación | |
| Frontal | - |
| Trasero | 4x 40 mm (opcional) |
| Inertermedios | 4x 80 mm PWM |
| Dimensiones | |
| Ancho | 430 mm |
| Alto | 88 mm |
| Fondo | 660 mm |
| Peso | 10.1 Kg |
