Bionix P120 Rojo/Negro 120x120x27
Bionix P120 Rojo/Negro 120x120x27
- Optimized for static pressure.
- Strong cooling performance.
- More efficient technology.
- Maximum softness, minimum vibration.
- Improved lifespan.
- It changes from 200 to 2100 rpm regulated by PWM PST.
of guarantee
shipping
Secure pay
When developing the new BioniX P120, special emphasis was placed on focused airflow and high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance.
Numerous improvements, for example in motor technology and a newly developed fan design, have dramatically increased the performance of the P fans.
In internal performance tests, the new P fans, rated at 28 dB (A), left many competitors behind.
With a state-of-the-art neodymium-iron-boron magnetic ring, the BioniX P120 is significantly more efficient than its predecessor. Without compromising performance, this saves energy and significantly lowers the motor coil temperature.
The operating noise of the newly developed ARCTIC motor is hardly noticeable even at the lowest speed. Thanks to sinus magnetization, the P fan motor generates only 5% of the commutation vibrations of a conventional DC motor. Thanks to the even distribution of force, there is no need for rubber damping.
A motor temperature below 10 ° C doubles the service life. Due to the low temperature of the coil of the new ARCTIC fan motors, the service life of the fans is four times longer. Therefore, we extend the warranty to 10 years.
With a wide speed range and innovative PWM Sharing (PST) technology, the fan speed of the BioniX P120 can be controlled synchronously with all other fans. This reduces noise development to a minimum and at the same time ensures maximum cooling performance.
Thanks to an alloy / lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved.
In this way, less heat is generated, there is less noise in the bearings and the life of the fan is extended.
Highlights...
* Optimized for static pressure.
* Strong cooling performance.
* More efficient technology.
* Maximum softness, minimum vibration.
* Improved lifespan.
* Changes from 200 to 2100 rpm regulated by PWM PST.
Velocidad | 200-2100 rpm |
Flujo de aire | 67,56 CFM / 114,9 m³ / h |
Presión estatica | 2,75 (mm / H2O) |
Nivel de ruido | 0.45 sone |
Tipo de control | PST |
Conexión | Conector de 4 pines + enchufe de 4 pines |
Voltaje típico | 12 V CC |
Amperaje | 0,13 A |
Longitud del cable | 400mm |
Ancho x Alto x Fondo | 120mm x 120mm x 27mm |
Peso | 140Gr |
When developing the new BioniX P120, special emphasis was placed on focused airflow and high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance.
Numerous improvements, for example in motor technology and a newly developed fan design, have dramatically increased the performance of the P fans.
In internal performance tests, the new P fans, rated at 28 dB (A), left many competitors behind.
With a state-of-the-art neodymium-iron-boron magnetic ring, the BioniX P120 is significantly more efficient than its predecessor. Without compromising performance, this saves energy and significantly lowers the motor coil temperature.
The operating noise of the newly developed ARCTIC motor is hardly noticeable even at the lowest speed. Thanks to sinus magnetization, the P fan motor generates only 5% of the commutation vibrations of a conventional DC motor. Thanks to the even distribution of force, there is no need for rubber damping.
A motor temperature below 10 ° C doubles the service life. Due to the low temperature of the coil of the new ARCTIC fan motors, the service life of the fans is four times longer. Therefore, we extend the warranty to 10 years.
With a wide speed range and innovative PWM Sharing (PST) technology, the fan speed of the BioniX P120 can be controlled synchronously with all other fans. This reduces noise development to a minimum and at the same time ensures maximum cooling performance.
Thanks to an alloy / lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved.
In this way, less heat is generated, there is less noise in the bearings and the life of the fan is extended.
Highlights...
* Optimized for static pressure.
* Strong cooling performance.
* More efficient technology.
* Maximum softness, minimum vibration.
* Improved lifespan.
* Changes from 200 to 2100 rpm regulated by PWM PST.
Velocidad | 200-2100 rpm |
Flujo de aire | 67,56 CFM / 114,9 m³ / h |
Presión estatica | 2,75 (mm / H2O) |
Nivel de ruido | 0.45 sone |
Tipo de control | PST |
Conexión | Conector de 4 pines + enchufe de 4 pines |
Voltaje típico | 12 V CC |
Amperaje | 0,13 A |
Longitud del cable | 400mm |
Ancho x Alto x Fondo | 120mm x 120mm x 27mm |
Peso | 140Gr |