Bionix P120 A-RGB Bundle 3 ventiladores+controlador
- Fan speed: 400-2300rpm
- Airflow: 48 CFM
- Static pressure: 2.1mm
- Noise level: 0.45 Sone
- Operating ambient temperature: 0-40 degree
- Fan frame: BioniX
- Control type: PWM PST
- Connector: 7 pins
- Dimensions: 120 x 120 x 30
of guarantee
Insured
Secure pay
The 12 A-RGB LEDs installed in the BioniX P120 A-RGB can be controlled autonomously. The BioniX P120 A-RGB supports common A-RGB standards from leading motherboard manufacturers for the simplest possible use. So it can be fully illuminated directly via A-RGB motherboard connection or by external controller and synchronized with other hardware lighting.
The ARCTIC BioniX P120 A-RGB has modular cable management and uses two connections: a power input and a connector output. ARCTIC uses an 8-pin connector for this, which forwards both fan and lighting signals and considerably simplifies wiring *. The included connector block also allows for a wireless serial connection.
Thanks to an alloy / lubricant combination developed in Germany, friction within the bearing is reduced, increasing efficiency. In this way, less heat is generated, there is less noise in the bearings and the life of the fan is extended.
With the BioniX P120 A-RGB, as with the entire P-series, special emphasis was placed on focused airflow and high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance. This makes the BioniX P120 A-RGB especially suitable for use on covered vents or inlets with filters.
Thanks to sinus magnetization, the P fan motor generates only 5% of the commutation vibrations of a conventional DC motor. Additionally, the ARCTIC BioniX P120 A-RGB has rubber pads on its contact surfaces for further decoupling.
With a wide speed range and connector functionality, the BioniX P120 A-RGB's fan speed can be controlled synchronously with other fans. This reduces noise development to a minimum and at the same time ensures maximum cooling performance.
The BioniX P120 A-RGB is available as a single case fan or in a bundle, including 3 BioniX P120 A-RGB controllers and A-RGB ARCTICs.
We highlight ...
* Fan speed: 400-2300rpm.
* Copper base and aluminum sheets.
* Static pressure: 2.1mm.
* Adjustable speed: 600 ~ 3000RPM.
* Dimensions: 120 x 120 x 30
Velocidadd del ventilador | 400-2300 RPM |
Flujo de aire | 48 CFM |
Presión estática | 2.1 mm |
Nivel de ruido | 0.45 Sone |
Temperatura ambiente de funcionamiento | 0.40 grados |
Marco del venilador | Bionix |
Conector | 7 pines |
Voltaje | 12 v |
Longitud del cable | 400mm |
Dimensiones | 120 x 120 x 30 |
The 12 A-RGB LEDs installed in the BioniX P120 A-RGB can be controlled autonomously. The BioniX P120 A-RGB supports common A-RGB standards from leading motherboard manufacturers for the simplest possible use. So it can be fully illuminated directly via A-RGB motherboard connection or by external controller and synchronized with other hardware lighting.
The ARCTIC BioniX P120 A-RGB has modular cable management and uses two connections: a power input and a connector output. ARCTIC uses an 8-pin connector for this, which forwards both fan and lighting signals and considerably simplifies wiring *. The included connector block also allows for a wireless serial connection.
Thanks to an alloy / lubricant combination developed in Germany, friction within the bearing is reduced, increasing efficiency. In this way, less heat is generated, there is less noise in the bearings and the life of the fan is extended.
With the BioniX P120 A-RGB, as with the entire P-series, special emphasis was placed on focused airflow and high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance. This makes the BioniX P120 A-RGB especially suitable for use on covered vents or inlets with filters.
Thanks to sinus magnetization, the P fan motor generates only 5% of the commutation vibrations of a conventional DC motor. Additionally, the ARCTIC BioniX P120 A-RGB has rubber pads on its contact surfaces for further decoupling.
With a wide speed range and connector functionality, the BioniX P120 A-RGB's fan speed can be controlled synchronously with other fans. This reduces noise development to a minimum and at the same time ensures maximum cooling performance.
The BioniX P120 A-RGB is available as a single case fan or in a bundle, including 3 BioniX P120 A-RGB controllers and A-RGB ARCTICs.
We highlight ...
* Fan speed: 400-2300rpm.
* Copper base and aluminum sheets.
* Static pressure: 2.1mm.
* Adjustable speed: 600 ~ 3000RPM.
* Dimensions: 120 x 120 x 30
Velocidadd del ventilador | 400-2300 RPM |
Flujo de aire | 48 CFM |
Presión estática | 2.1 mm |
Nivel de ruido | 0.45 Sone |
Temperatura ambiente de funcionamiento | 0.40 grados |
Marco del venilador | Bionix |
Conector | 7 pines |
Voltaje | 12 v |
Longitud del cable | 400mm |
Dimensiones | 120 x 120 x 30 |