Arctic P14 PWM 140x140x25

Arctic P14 PWM 140x140x25

Arctic
  • 140x140x27mm fan.
  • Low noise level: 0.3 sone.
  • High air flow: 72.8 CFM.
  • 4-Pin connection.

P/N: ACFAN00124A - EAN/UPC: 4895213701556

6,12 € Without VAT
7,41 € With VAT
In stock
Delivery 24/48h working
2 years
of guarantee
sending
shipping
100%
Secure pay

During the development of the new P14 PWM, special emphasis was placed on a focused air stream and therefore high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM is particularly suitable for use in heat sinks and radiators.

The engine is powered by a latest generation Neodym-Iron-Boron-Magnet ring, which allows the new P14 PWM to operate much more efficiently than its predecessors. This saves energy and reduces coil temperature without compromising performance.

Even at low speeds, the running sound of the new ARCTIC engine is barely noticeable. Due to sinus magnetization, the new motor only creates around 5% of the commutation vibration of a normal unfiltered DC motor. Consequently, there is no need for rubber spacers due to the constant and smooth torque of the new motor.

A 10 ° C lower motor temperature approximately doubles the life of a fan. The new ARCTIC motor has a four times longer service life thanks to its low coil temperature. Accordingly, we have extended the warranty to 10 years.


Thanks to the 4-pin connector, the RPM can be regulated over a wide spectrum through PWM. In this way, noise is kept to a minimum, while maximum cooling performance is guaranteed when needed.

Thanks to an alloy / lubricant combination developed in Germany, friction within the bearing is reduced and higher efficiency is achieved. As a result, there is less heat development and less bearing noise, which means you can enjoy a longer life for your fan.

Highlights...

* Fan 140x140x27mm.
* Low noise level: 0.3 sone.
* High air flow: 72.8 CFM.
* 4-Pin connection.

Datos Generales
Modelo Arctic P14 PWM
Ventilador 140 mm, 3.000 RPM
Conector 4 pines
Velocidad (RPM) 150 ~ 1700 RPM
Nivel Ruido dB(A) 0.3 Sone
Extras Masilla Arctic MX-2 preinstalada
Dimensiones y Peso
Dimensiones 140 x 140 x 27 mm

During the development of the new P14 PWM, special emphasis was placed on a focused air stream and therefore high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM is particularly suitable for use in heat sinks and radiators.

The engine is powered by a latest generation Neodym-Iron-Boron-Magnet ring, which allows the new P14 PWM to operate much more efficiently than its predecessors. This saves energy and reduces coil temperature without compromising performance.

Even at low speeds, the running sound of the new ARCTIC engine is barely noticeable. Due to sinus magnetization, the new motor only creates around 5% of the commutation vibration of a normal unfiltered DC motor. Consequently, there is no need for rubber spacers due to the constant and smooth torque of the new motor.

A 10 ° C lower motor temperature approximately doubles the life of a fan. The new ARCTIC motor has a four times longer service life thanks to its low coil temperature. Accordingly, we have extended the warranty to 10 years.


Thanks to the 4-pin connector, the RPM can be regulated over a wide spectrum through PWM. In this way, noise is kept to a minimum, while maximum cooling performance is guaranteed when needed.

Thanks to an alloy / lubricant combination developed in Germany, friction within the bearing is reduced and higher efficiency is achieved. As a result, there is less heat development and less bearing noise, which means you can enjoy a longer life for your fan.

Highlights...

* Fan 140x140x27mm.
* Low noise level: 0.3 sone.
* High air flow: 72.8 CFM.
* 4-Pin connection.

Datos Generales
Modelo Arctic P14 PWM
Ventilador 140 mm, 3.000 RPM
Conector 4 pines
Velocidad (RPM) 150 ~ 1700 RPM
Nivel Ruido dB(A) 0.3 Sone
Extras Masilla Arctic MX-2 preinstalada
Dimensiones y Peso
Dimensiones 140 x 140 x 27 mm