Bionix P140 Gris/Blanco 140x140x28
Bionix P140 Gris/Blanco 140x140x28
- Optimized for static pressure.
- Strong cooling performance.
- More efficient technology.
- Maximum softness, minimum vibration.
- Improved lifespan.
- It changes from 200 to 1950 rpm regulated by PWM PST.
of guarantee
shipping
Secure pay
During the development of the new BioniX P140, particular emphasis was placed on a concentrated air stream and therefore high static pressure.
The fan ensures extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P140 is particularly suitable for use in heat sinks and radiators.
The motor is powered by a state-of-the-art neodymium-iron-boron magnet ring, which enables the new BioniX P140 to operate much more efficiently than its predecessors. This saves energy and reduces coil temperature without compromising performance.
Even at low speeds, the running sound of the new ARCTIC motor is hardly noticeable.
Due to sinus magnetization, the new motor only creates about 5% of the commutation vibration of a normal unfiltered DC motor. Consequently, there is no need for rubber spacers due to the constant and smooth torque of the new motor.
A 10 ° C lower motor temperature roughly doubles the life of a fan. The new ARCTIC motor has four times longer service life thanks to its low coil temperature. Consequently, we have extended the warranty to 10 years.
With a wide dimming range and PWM Sharing (PST) technology, the speed of the BioniX P140 fan can be synchronously controlled with all of your other fans together. This keeps noise to a minimum while ensuring maximum cooling performance when needed.
Thanks to an alloy / lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development and less noise in the bearings, which means that you can enjoy a longer life from your fan.
Highlights...
* Optimized for static pressure.
* Strong cooling performance.
* More efficient technology.
* Maximum softness, minimum vibration.
* Improved lifespan
* Changes from 200 to 1950 rpm regulated by PWM PST.
Velocidad | 200-2100 rpm |
Flujo de aire | 77,6 CFM / 131,92 m³ / h |
Presión estatica | 2,85 (mm / H2O) |
Nivel de ruido | 0.45 sone |
Tipo de control | PST |
Conexión | Conector de 4 pines + enchufe de 4 pines |
Voltaje típico | 12 V CC |
Amperaje | 0,15 A |
Longitud del cable | 400mm |
Ancho x Alto x Fondo | 140mm x 140mm x 28mm |
Peso | 181Gr |
During the development of the new BioniX P140, particular emphasis was placed on a concentrated air stream and therefore high static pressure.
The fan ensures extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P140 is particularly suitable for use in heat sinks and radiators.
The motor is powered by a state-of-the-art neodymium-iron-boron magnet ring, which enables the new BioniX P140 to operate much more efficiently than its predecessors. This saves energy and reduces coil temperature without compromising performance.
Even at low speeds, the running sound of the new ARCTIC motor is hardly noticeable.
Due to sinus magnetization, the new motor only creates about 5% of the commutation vibration of a normal unfiltered DC motor. Consequently, there is no need for rubber spacers due to the constant and smooth torque of the new motor.
A 10 ° C lower motor temperature roughly doubles the life of a fan. The new ARCTIC motor has four times longer service life thanks to its low coil temperature. Consequently, we have extended the warranty to 10 years.
With a wide dimming range and PWM Sharing (PST) technology, the speed of the BioniX P140 fan can be synchronously controlled with all of your other fans together. This keeps noise to a minimum while ensuring maximum cooling performance when needed.
Thanks to an alloy / lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development and less noise in the bearings, which means that you can enjoy a longer life from your fan.
Highlights...
* Optimized for static pressure.
* Strong cooling performance.
* More efficient technology.
* Maximum softness, minimum vibration.
* Improved lifespan
* Changes from 200 to 1950 rpm regulated by PWM PST.
Velocidad | 200-2100 rpm |
Flujo de aire | 77,6 CFM / 131,92 m³ / h |
Presión estatica | 2,85 (mm / H2O) |
Nivel de ruido | 0.45 sone |
Tipo de control | PST |
Conexión | Conector de 4 pines + enchufe de 4 pines |
Voltaje típico | 12 V CC |
Amperaje | 0,15 A |
Longitud del cable | 400mm |
Ancho x Alto x Fondo | 140mm x 140mm x 28mm |
Peso | 181Gr |