Supermicro X10SBA. Intel Celeron J1900. Mini ITX.

Supermicro X10SBA. Intel Celeron J1900. Mini ITX.

Supermicro
  • Intel J1900 22nm processor.
  • Up to 8Gb So-DIMM DDR3L at 1333Mhz.
  • SATA 3.0 (RAID 0, 1, 10).
  • 1 PCI-E x2, 1 Mini-PCI-E slot and 1 mSATA slot.
  • Intel i210AT dual port GbE LAN.
  • 1 USB 3.0 port and 5 USB 2.0 ports.

P/N: MBD-X10SBA-O - EAN/UPC: 0672042145195

169,39 € Without VAT
204,96 € With VAT
Only 4 units left
Approximate delivery between 27 octubre and 28 octubre
2 years
of guarantee
sending
shipping
100%
Secure pay
Physical Stats   Expansion Slots
Form Factor  Mini-ITX   PCI-E 1x PCI-E 2.0 x2
1x Mini-PCI-E slot, 1 mSATA slot
Dimensions 17.02 x 17.02 cm   System BIOS
Processor/Cache   Bios Type AMI UEFI
CPU Intel Celeron Processor J1900
Single Socket FCBGA1170 supported, CPU TDP support Up to 10W TDP
2M Cache, up to 2.42 GHz, 8W (formerly Bay Trail)
  Bios Features Plug and Play (PnP), ACPI 5.0, UEFI 2.3.1, SMBIOS 2.7.1, DMI 2.3
USB Keyboard support, RTC (Real Time Clock) Wakeup
3TB HDD Support
Cores / Cache 4 cores, 4 threads / 2Mb L2 cache   Management
System Memory   Software NMI, SuperDoctor 5, Watchdog
Memory Capacity Up to 8GB Unbuffered non-ECC SO-DIMM, DDR3-1333MHz, in 2 DIMM slots
2x 204-pin SO-DIMM socket ;
8GB with 2x 4GB SODIMM configuration Some 1600MHz memory can be used, but memory capacity will operate at 1333MHz
  Power Configurations ACPI Power Management
Main Switch Override Mechanism
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
Memory Type 1333/1066MHz DDR3 SO-DIMM, 204-pin gold-plated DIMMs   PC Health Monitoring
DIMM Sizes 2Gb, 4 Gb   Voltage +3.3V, +5V, Memory, Memory Voltages, System level control, System temperature
Memory Voltage 1.35 V   LED CPU / System Overheat LED, Standby alert LED
On-Board Devices   Temperature Monitoring for CPU and chassis environment, CPU thermal trip support
Chipset Intel J1900 System on Chip   FAN 2x 4-pin fan headers (up to 2 fans), Fan speed control, Low noise fan speed control
SATA SoC controller for 2 SATA2 (3 Gbps) ports;
Marvel 88SE9230 controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,10
  Other Features 12V DC or ATX Power Source, 4-pin 12v DC power connector, ACPI power management, ATX Power connector, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, RoHS, System level control, WOL
Network Controllers Dual LAN with Intel Ethernet Controller I210-AT   Operating Environment
Audio ALCC 888S HD Audio   Operating Temperature 0°C ~ 60°C (32°F ~ 140°F)
Graphics Intel HD 4000 Graphics   Non-Operating Temperature -20°C ~ 60°C (-4°F ~ 140°F)
Input / Output   Operating Relative Humidity 10% ~ 85% (non-condensing)
SATA 4x SATA3 (6Gbps) ports
2x SATA2 (3Gbps) ports
  Non-Operating Relative Humidity 10% ~ 95% (non-condensing)
LAN 2x RJ45 Gigabit Ethernet LAN ports      
USB 5x USB 2.0 ports (1 rear + 3 headers + 1 Type A)
1x USB 3.0 ports (1 rear);
     
Video Output 1 HDMI port, 1 DP (DisplayPort) port, 1 VGA port      
Serial Port 4 COM Ports (4 headers)
4 fast UART 16550 serial
     
TPM 1 TPM Header      
Physical Stats   Expansion Slots
Form Factor  Mini-ITX   PCI-E 1x PCI-E 2.0 x2
1x Mini-PCI-E slot, 1 mSATA slot
Dimensions 17.02 x 17.02 cm   System BIOS
Processor/Cache   Bios Type AMI UEFI
CPU Intel Celeron Processor J1900
Single Socket FCBGA1170 supported, CPU TDP support Up to 10W TDP
2M Cache, up to 2.42 GHz, 8W (formerly Bay Trail)
  Bios Features Plug and Play (PnP), ACPI 5.0, UEFI 2.3.1, SMBIOS 2.7.1, DMI 2.3
USB Keyboard support, RTC (Real Time Clock) Wakeup
3TB HDD Support
Cores / Cache 4 cores, 4 threads / 2Mb L2 cache   Management
System Memory   Software NMI, SuperDoctor 5, Watchdog
Memory Capacity Up to 8GB Unbuffered non-ECC SO-DIMM, DDR3-1333MHz, in 2 DIMM slots
2x 204-pin SO-DIMM socket ;
8GB with 2x 4GB SODIMM configuration Some 1600MHz memory can be used, but memory capacity will operate at 1333MHz
  Power Configurations ACPI Power Management
Main Switch Override Mechanism
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
Memory Type 1333/1066MHz DDR3 SO-DIMM, 204-pin gold-plated DIMMs   PC Health Monitoring
DIMM Sizes 2Gb, 4 Gb   Voltage +3.3V, +5V, Memory, Memory Voltages, System level control, System temperature
Memory Voltage 1.35 V   LED CPU / System Overheat LED, Standby alert LED
On-Board Devices   Temperature Monitoring for CPU and chassis environment, CPU thermal trip support
Chipset Intel J1900 System on Chip   FAN 2x 4-pin fan headers (up to 2 fans), Fan speed control, Low noise fan speed control
SATA SoC controller for 2 SATA2 (3 Gbps) ports;
Marvel 88SE9230 controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,10
  Other Features 12V DC or ATX Power Source, 4-pin 12v DC power connector, ACPI power management, ATX Power connector, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, RoHS, System level control, WOL
Network Controllers Dual LAN with Intel Ethernet Controller I210-AT   Operating Environment
Audio ALCC 888S HD Audio   Operating Temperature 0°C ~ 60°C (32°F ~ 140°F)
Graphics Intel HD 4000 Graphics   Non-Operating Temperature -20°C ~ 60°C (-4°F ~ 140°F)
Input / Output   Operating Relative Humidity 10% ~ 85% (non-condensing)
SATA 4x SATA3 (6Gbps) ports
2x SATA2 (3Gbps) ports
  Non-Operating Relative Humidity 10% ~ 95% (non-condensing)
LAN 2x RJ45 Gigabit Ethernet LAN ports      
USB 5x USB 2.0 ports (1 rear + 3 headers + 1 Type A)
1x USB 3.0 ports (1 rear);
     
Video Output 1 HDMI port, 1 DP (DisplayPort) port, 1 VGA port      
Serial Port 4 COM Ports (4 headers)
4 fast UART 16550 serial
     
TPM 1 TPM Header